If you’re looking for Philips universal remote codes to program your remote and control multiple devices, you’ve come to the right place. Philips universal remotes are a convenient solution for managing multiple electronics, including TVs, DVD players, Blu-ray players, soundbars, and streaming devices. This guide provides a comprehensive list of remote codes, step-by-step programming instructions, and troubleshooting tips to ensure a seamless setup.

What Are Philips Universal Remote Codes?

Philips universal remote codes are pre-programmed numeric codes that allow your remote to communicate with various devices. Each brand and model of electronic devices has specific codes that must be entered into the remote to establish a connection. These codes eliminate the need for multiple remotes, making entertainment control much easier.

How to Find the Correct Philips Universal Remote Code

There are several ways to locate the right Philips remote codes for your device:

• Philips User Manual: The manual that came with your remote includes a list of codes for different brands.
• Philips Website: The official Philips website provides an online code lookup tool.
• Code Search Method: If you can’t find the code in the manual or online, the remote itself has an automatic code search function.

Philips Universal Remote Codes List

Here is a selection of popular device brands and their corresponding Philips universal remote codes:

TV Brands & Remote Codes

• Samsung: 0112, 0309, 0502, 0209
• LG: 0002, 0502, 0102, 0307
• Sony: 0810, 1904, 0602, 0708
• Vizio: 1507, 2106, 1404, 0902
• Toshiba: 0508, 0513, 0302, 0714

DVD Player Codes

• Sony: 2107, 2506, 1407, 1205
• LG: 0907, 0503, 0802, 0606
• Samsung: 0407, 0807, 0906, 1207
• Panasonic: 0303, 0603, 1003, 0703

Blu-ray Player Codes

• Samsung: 1209, 1508, 1704, 1906
• LG: 0712, 0805, 1007, 1609
• Sony: 2003, 2205, 2406, 2607

Streaming Device Codes

• Roku: 2407, 1903, 1706, 1304
• Apple TV: 2208, 2509, 2005, 1802
• Amazon Fire Stick: 1806, 2307, 2505, 2103

Soundbar Codes

• Bose: 1307, 1406, 1505, 1703
• JBL: 1106, 1208, 1405, 1607
• Samsung: 0607, 0808, 1006, 1204

How to Program a Philips Universal Remote

Method 1: Direct Code Entry

1. Turn on your device (TV, DVD player, or streaming device).
2. Press and hold the Setup button until the indicator light stays on.
3. Press the device button (TV, DVD, AUX, etc.).
4. Enter the four-digit code from the list above.
5. Release the Setup button and test the remote by pressing the power button.
6. If the device turns off, the setup is complete. If not, try a different code.

Method 2: Auto Code Search

1. Turn on your device manually.
2. Hold down the Setup button until the light remains on.
3. Press the device button (TV, DVD, AUX, etc.).
4. Press and release the Power button repeatedly until the device turns off.
5. Press Enter to save the code.

Method 3: Code Retrieval (For Forgotten Codes)

1. Hold the Setup button until the indicator light stays on.
2. Press and release the Device button (TV, DVD, AUX, etc.).
3. Press and release the Info button to display the programmed code.

Troubleshooting Common Philips Remote Issues

1. Remote Not Responding

• Ensure batteries are installed correctly and have enough charge.
• Reset the remote by removing the batteries and pressing all buttons for 10 seconds.
• Try reprogramming the remote using a different code.

2. Some Buttons Not Working

• Make sure the remote has a clear line of sight to the device.
• Clean the remote’s infrared sensor.

3. Device Not Turning On

• Double-check that the correct code was entered.
• Try the auto-code search method.

Conclusion

Using Philips universal remote codes simplifies your home entertainment setup by allowing you to control multiple devices with a single remote. Whether you’re setting up a TV, DVD player, Blu-ray player, streaming device, or soundbar, this guide provides all the essential information to make programming easy. If you encounter any issues, try the troubleshooting steps above to ensure smooth operation.