Close this search box.

Repair Hard Disks with fsck on macOS

Table of Contents

When your hard drive starts to fail, Disk Utility might not be powerful enough to save you. Instead, you might want to turn to one of the big guns: fsck. fsck, which stands for “File System Consistency Check,” is a command-line tool that reviews and repairs the underlying structure of a hard drive. If you’re wondering, it’s no coincidence that it looks like the thing you say when you hard drive fails. We all hope we never have to use it, but if you do, here’s a brief introduction into its functionality.

If you’re familiar with the fsck from Linux, you’ll notice a lot of similarities in the macOS version. This article is written with a focus on the Mac’s user interface. Uniquely, fsck needs to be run in single user mode to be even sort of useful, representation a significant limitation in comparison to the Linux version.

Finding the Right Disk

Before you can run fsck, you’ll need to find the device node and identifier of the disk you want to target. We’ll use Terminal’s diskutil command to accomplish that. If you can’t run Terminal from inside macOS, you can access the same data with /sbin/diskutil inside Single User mode.

1. Open Terminal (/Applications/Utilities/

2. Type the following command, then press “Enter.” This will run the command line version of Disk Utility, which provides more data.

diskutil list

fsck on macOS

3. You’ll be given a list of all currently connected hard drives. This includes mounted and unmounted drive

fsck on macOS

4. Locate the disk you want to fsck and find its device identifier. It will look like /dev/disk1. You’ll find this information along the left margin of the Terminal window. Write this ID down: you’ll need it in the next steps.

fsck on macOS

Running fsck from Single User Mode

Because fsck can edit the core file system, macOS won’t let you run it from inside the operating system. You might think you can run fsck on a non-booting disk, but you’d be wrong. fsck is basically non-functional while in macOS’s userland. You’ll need to reboot into Single User mode, a text-only superuser interface for macOS. If you familiar with the basics of Terminal, you’ll recognize Single User mode.

1. Restart your computer.

2. Hold down “Command + S” while your computer restarts to enter Single User mode. You can release the keys once you see white text start to appear on the startup screen.

3. Some white text will scroll by quickly. When it stops, you’ll see a command prompt at the bottom of the screen that reads root#.

fsck on macOS

If the text stops scrolling but you don’t see this prompt, press the “Enter” key once to reveal it.

4. To repair the boot disk, type in the following command, then press “Enter.”

/sbin/fsck -fy
fsck on macOS 

This runs fsck two flags:

  • -f forces it to check journaled file systems like HFS+
  •  -y automatically says “yes” to any prompts that fsck might encounter.

The -y flag can be a little dangerous, so use it carefully. As fsck’s man page points out, “this should be used with great caution, as this is a free license to continue after essentially unlimited trouble has been encountered.” If you’re concerned about giving fsck free reign over your file system, you can leave it off and press the “y” key manually when prompted.

5. You can also use fsck to repair non-booting disks, but you’ll need to know the file system type. If you’re not sure about the file system, it’s probably HFS+. You can find out for sure with the diskutil command we ran earlier.

For example, if I wanted to run fsck on /dev/disk2, I might use the following command:

/sbin/fsck_hfs -fy /dev/disk2

fsck on macOS 

That command runs the HFS version of fsck on the target drive. Other available file systems include fsck_msdos, which runs Windows’ FAT file systems; fsck_exfat, which examines ExFAT filesystems; and fsck_udf, which looks at UDF file systems.

4. fsck will check the file system and attempt to repair any damage that it finds. If it finds no damage, it will exit with “OK.”

5. When fsck is finished checking and repairing the filesystem, type reboot into the command prompt and press “Enter.”

When fsck Fails

fsck on macOS despair

fsck is powerful, but it can’t fix everything. If the utility can’t repair your disk, you’ll be told through a brief failure message. This is typically pretty short on detail, but it does tell you that you’ll need a more powerful solution.

You can use two programs to save your disk: DiskWarrior and Data Rescue. Data Rescue is geared towards recovering files from damaged hard drives, while DiskWarrior can also get corrupted drives running again. Both programs are expensive but capable.

In either case, you’ll need to connect the hard drive to a different Mac and run those applications from inside a functioning version of macOS. Because of file system incompatibilities, you can’t easily fix a Mac-formatted disk from within Windows.


fsck on the Mac isn’t as powerful as fsck on Linux, but it can still be a lifesaver if you end up with a corrupted boot disk or damaged hard drive.

You might also like:

Pro Terminal Commands: Using diskutil

Improve Productivity with Regular Expressions

iOS 11 Brings a Heap of New Features This Fall

Picture of Kossi Adzo

Kossi Adzo

Kossi Adzo is a technology enthusiast and digital strategist with a fervent passion for Apple products and the innovative technologies that orbit them. With a background in computer science and a decade of experience in app development and digital marketing, Kossi brings a wealth of knowledge and a unique perspective to the Apple Gazette team.

6 thoughts on “Repair Hard Disks with fsck on macOS

  1. Hi
    can i repair a damaged volum Header on externel Volum?
    I can´t found something to repair it with fsck. Other software didn´t works.

  2. Hi
    can i repair a damaged volume Header on externel Volume?
    I can´t found something to repair it with fsck. Other software didn´t works.

  3. What’s wrong with my computer , the command s root: /sbin/ fsck-fy : no such file or directory.
    Is it totally gone.

  4. Ah, you’ve got the space in the wrong place! Precise spacing is extremely important on terminal commands like fsck. The correct spacing is below:

    /sbin/fsck -fy

    Make sure that the space is between fsck and -fy, not between /sbin/ and fsck.

  5. I keep getting this message: “The volume could not be verified completely”

    I have used :

    /sbin/fsck_hfs -fy /dev/disk2s1

    Any help would be much appreciated

    Thank you

  6. el capitan is now protecting permissions, even with your /usr/libexec/repair_packages –repair –standard-pkgs (thanks for it) it’s not more possible to repair permissions – the file systems to repair are read only – any hint ?

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts